PROGRAMME
International Workshop
RESEARCH
QUALITY IN DOCTORAL SCHOOL
INCREASED
INDUSTRIAL AND INTERNATIONAL VISIBILITY
13 – 14 July
2011 “Dunarea de Jos’ University of Galati
|
WEDNESDAY:
13 of JULY 2011 |
VENUE : Conferace hall of
Hotel Galati placed in the administrative center, Galati |
9h00 - 9h30 |
Welcome – Opening
UNIVERSITY OF GALATI
project expert
CHIMIE
DE PARIS, project expert
project
expert
-
Prof. dr.
Pierre Ponthiaux: ECOLE CENTRALE PARIS, project exper
-
Prof. dr.
ir. Bart van der Bruggen: KATHOLIEKE UNIVERSITEIT
LEUVEN,
project expert
LEUVEN, project expert |
Chairman – Prof.dr. Mirela Praisler |
9h30 - 9h45 |
Introduction to workshop and presentation of POSDRU 19524 project stage
Prof. Maria Vlad – manager
project, Dunarea de Jos University of Galati |
9h45 -10h15 |
Developing in the doctoral schools of research teams with high
performances and international visibility
Authors:
Prof.dr. E. Rusu, Prof.dr. V. Minzu and Prof.dr.V. Cristea |
10h15 -10h45 |
Round Table 1 |
10h45
-11h15 |
Coffee
break |
Chairman – Prof. dr. Philippe Marcus |
11h15 -11h40 |
Clustering
research on membranes: developing collaborative links to international
consortia
Author:
Prof. Bart van der Bruggen |
11h40 -12h10 |
Analysis of the Doctoral School at “Dunarea de
Jos” University of Galati involved in PhD EXPERT project
Authors: Prof.dr. Lidia
Benea, Prof.dr. Maria Vlad, Prof.dr. Antoaneta ENE |
12h10 -12h40 |
Round Table 2 |
12h40 -14h30 |
Lunch |
Chairman –Prof. dr.Jean Bernard Guillot |
14h30 -15h00 |
Sustainable
materials management at KU Leuven a multidisciplinary approach
Author: prof. dr. Thomas van
Gerven |
15h00 -15h20 |
Atomic
and nuclear microanalytical techniques for the investigation
of iron
and steel materials
Authors: Prof.dr. Antoaneta
ENE, Alina (Bosneaga) SION |
15h20 -15h40 |
Dynamic
behaviour of ships navigating in the coastal environment of the Black
Sea,
Authors: Carmen GASPAROTTI , Prof.dr. Eugen RUSU |
15h40 -16h00 |
Improved doctoral programs through partnership with the European
Universities
involved
in the PhD EXPERT project
Prof.
dr. Rusu Eugen,
Prof.dr.
Mirela Praisler,
Prof.dr.
Iulian Birsan
|
16h00 -16h30 |
Round Table 3 |
19h00 |
Social evening |
THURSDAY:
14 of JULY, 2011 |
Chairman –Prof.dr. Jean- Pirre Celis |
9h00 -
9h30 |
Partnership
between Doctoral school and Industry at regional and national level
Auhos: Assist.
Prof. Alina Ciubotariu, prof. Mihaela Banu, prof. Mereuta Elena
|
9h30 -
10h30 |
Round Table 4 |
10h45 -11h15 |
Coffee break |
Chairman – Prof.
dr. Lidia Benea |
Oral
Presentation of on - going Doctoral Theses at UDJG laboratories |
11h15
-11h30 |
1. The use
of ZnO nano-particles in polymeric membranes
Authors: Stefan Balta, Lidia
BENEA, Bart Van der BRUGGEN |
11h30
-11h45 |
2. Influence
of nanometric TiO2 particles co-deposition on nickel
electrocrystallization mechanism.
Authors: Adina PAVLOV, Lidia
BENEA |
11h45
-12h00 |
3. Micro alloyed Cu and Cu-based alloys for biomedical applications
Authors: Cristina IORDACHE, Maria. VLAD, Maria CALIN, Jurgen ECKERT
|
12h00
-12h15 |
4.Algorithm for enhancement of the ECAP modelling based on experimental
and numerical studies,
Authors: A. Tofan BURUIANA, G. GURAU, Mihaela BANU
|
12h15
-12h 30 |
5. Surface
modification of Ti-6Al-4V alloy to improve the fretting – corrosion
resistance
in
simulating body fluid solution.
Authors: Eliza MARDARE,
Lidia BENEA, Jean-Pierre CELIS |
12h30
-12h45 |
6. Converter slags analysis and literature study on carbon dioxide
sequestration by steel slags.
Authors: Bodor Marius, Vlad
Maria, Thomas van Gerven |
12h45 -14h30 |
Lunch |
Chairman - Prof.dr. Pierre Ponhtiaux |
VENUE :
Domneasca
Street
no.
111,
Building
D,
1st floor, Room
D12 |
15h00 - 15h30 |
Project proposal
concerning a Doctoral School at "Dunarea de Jos" University of Galati
oriented toward the field of sustainable development.
Authors: Project experts |
15h30 - 15h45 |
Round
Table |
15h45 -16h00 |
Coffee break |
16h00 -
17h00 |
The best POSTER Competition
International Workshop
RESEARCH
QUALITY IN DOCTORAL SCHOOL
INCREASED
INDUSTRIAL AND INTERNATIONAL VISIBILITY
POSDRU
19524 |
P.1 |
Preventing and fighting against noxious substances by clean processing
technologies in metallurgical engineering
Authors: Elisabeta
VASILESCU, drd. Marian NEACSU |
P.2 |
Research
on increasing the durability
of parts by designing
optimal surface
thermal processing
technologies
Authors: Elisabeta
VASILESCU, drd. Marian NEACSU |
P.3 |
Performances of nanostructured Co/ZrO2 composite coatings
under tribocorrosion
conditions in Hank SBF solution.
Authors: drd. Simona F.
ŞORCARU, Lidia BENEA, François WENGER, Pierre PONTHIAUX |
P.4 |
Synthesis
and characterisation of cobalt – UHMWPE composite coatings by co –
electrodeposition on stainless steel
Authors: drd. Marilena
MARDARE, Lidia BENEA, Eliza MARDARE |
P.5 |
Nanocomposite coatings in copper matrix: performances and perspectives
Authors: drd. Lucian
Băican, Lidia
Benea |
P.6 |
Management
of the waste in the coastal environment of the Black Sea basin
Authors: drd. Carmen
GASPAROTTI, Eugen RUSU |
P.7 |
Wave energy
patterns in the Black Sea evaluated with satellite data and numerical
models
Authors: drd. Florin ONEA,
Eugen RUSU |
P.8 |
Wave
modeling to support harbor operations
Authors: drd. Dorin BUTUNOIU, Florin ONEA, Eugen RUSU |
P9 |
Study of the
hydrodynamic processes at the entrance of the Danube Delta
Authors: drd. Angela IVAN,
Eugen RUSU |
P.10 |
Setting
the optimum angle of solar collectors settlement
Authors: drd. Alexandrina
TEODORU, Tănase PANAIT, Krisztina UZUNEANU, Daniela TASMA, Cătălin
MOCANU |
P.11 |
Energetic
and exergetic efficiency of biomass gasification processes
Authors: drd. Daniela
TASMA, Tănase PANAIT, Alexandrina TEODORU, Georgiana ROLEA |
P.12 |
Low
potential heat recovery using heat pumps
Authors: drd. Sorinel
TOFAN, Tanase PANAIT |
P.13 |
Composite coatings with nickel matrix and silicon by clean technology
Authors:
Olga MITOSERIU,
Lucica BALINT,
drd.
Gina Genoveva ISTRATE, Simion Ioan BALINT, Tamara RADU |
P.14 |
Environmental issues in galvanizing process into the microalloyed melts
Authors:
Maria VLAD,
Lucica BALINT, Simion Ioan BALINT, Viorel DRĂGAN, Beatrice
TUDOR |
P.15 |
Textural
methods for myocardial tissue characterization
Authors:
drd. Simona MOLDOVAN, Luminita MORARU |
P.16 |
Denoise
the Echocardiographic Images using Fourier Transform
Authors: drd. Dorin BIBICU,
Luminita MORARU |
P.17 |
Characterisation of niobium carbide cemical deposition from vapour at
normal pressure
Authors: Constantinescu
STELA, Maria VLAD, drd. Marius BODOR |
P.18 |
Versatility of aluminium bronzes as wear resisting materials
Author: Anisoara CIOCAN
|
P.19. |
Environmentally friendly compositional solution for the galvanizing
baths
Authors: Anisoara CIOCAN,
Tamara RADU |
P.20. |
A
new solution for passivation coating treatment of the galvanized steel
Authors:
Tamara RADU, Anisoara CIOCAN |
P.21 |
Recycling
of zinc by - products
Authors:
Maria VLAD, Tamara RADU, Olga Mitoseru, Lucica
BALINT |
P.22 |
Zinc-nickel
alloys
coatings
on
steel
sheet
Authors:
Tamara RADU, Maria VLAD, Stela CONSTANTINESCU |
P.23 |
The
characterization of the Al-Cu composites plastically deformed with
lamelar
orientation of the components
Authors: Octavian POTECAŞU,
Florentina POTECAŞU |
P.24 |
Determination of microelemental content of metallurgical materials
using atomic
and nuclear
microanalytical techniques
Authors: Antoaneta ENE, drd.
Alina (Bosneaga) SION |
P.25 |
Monitoring techniques for inorganic and organic pollutants in soils
around an
integrated
iron and steel plant
Authors: Antoaneta ENE, drd.
Alina (Bosneaga) SION, Lucian GEORGESCU, Oleg BOGDEVICH |
P.26 |
Biomimetics of MT-Kinesin system used for bio-sensors applications
Authors:
Simona PATRICHE,
Mihaela BANU, M. AFTENI |
P.27 |
Steel
straps with high breaking strength obtained through contiuous flux
thermal treatment
Authors:Tiberiu
POTECAŞU, Octavian POTECAŞU, Petrica ALEXANDRU,
Francisco
Manuel BRAZ FERNANDES, Rui Jorge CORDEIRO SILVA |
P.28 |
The
influence of die radius on the material flow and deep-drawing force in
case of
micro-deep
drawing of nickel and steel
Authors:
M. AFTENI,
Mihaela BANU, Viorel PAUNOIU, Simona PATRICHE |
P.29 |
A
comparison of experimental results with the simulation model of
industrial dispersion pollutants
Authors:
Viorel MUNTEANU, Marius Bodor |
P.30 |
Nanostructuring by severe plastic deformation of advanced metallic
materials
Authors: Gheorghe GURAU, Carmela GURAU, F.M Braz FERNANDES, K. MAHESH |
P.31 |
Particles
size influence on the morphological aspects and corrosion behaviour of
PF
resin/Zn
composite layers
Authos:Alina
CIUBOTARIU, Lidia BENEA, Pierre PONTHIAUX, François WENGER |
P.32 |
Analysis
and quality surface of abrasive wear in sintered steels
Authos:
Mihaela MARIN,
Florentina POTECAŞU, Elena DRUGESCU,
Octavian POTECAŞU, Petrică
ALEXANDRU, Lorena DELEANU |
P.33 |
Ecological House, the First Step towards Developing the Concept of
Passive House
Authors: Stefan DRAGOMIR,
Maria VLAD, DRAGAN Viorel, Stefan BALTA |
P.34 |
Comparison the efficiency of three types of solar collectors
Authors: Catalin Bogdan
MOCANU, Panait TANASE, Alexandrina TEODORU,
Daniela TASMA |